Futaba 7c

The 7C is Futaba's middle of the range systems. It's a system that offers much of the 9C's set-up versatility matched to 4-channel ease of use. Like all other computer systems on this page, it offers Dial 'n Key™ simplicity for programming, and the 2.4GHz FASST system for an unparalleled RF link.

  • Futaba FASST technology
  • Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter even if one antenna loses signal.
  • Newly designed Dial-N-Key jog dial with joy stick button allows cursor movement in four directions for very user friendly navigating through menus and programming

Power Supply: 9.6V
Current Drain: 170mA

Size: 1.6 x 1.1 x .35" (40 x 27 x 9mm)
Power Requirement: 4.8 - 6V
Current Drain: 80mA (at no signal)
Weight: 7g

Futaba 7C 2.4GHz Transmitter
R617FS FASST 7-Ch Receiver
FBC-2J 230V Battery Charger
NT8S600B 600mAh 9.6V NiCd Transmitter Battery
Switch Harness w/Charge Cord

Futaba 6ex

Futaba's 6ex is a six channel computer radio with some high end features. 

Model Select – six model memory.
Model Type – select airplane or heli programming in one transmitter.
Servo Reversing – on all six channels.
Dual Rate/Exponential – for ailerons, elevator and rudder.
End Point Adjustment – fine-tunes servo throws on all six channels.
Digital Trim – stores trim settings for each model for aileron, elevator, rudder and throttle.
Fail Safe – a safety throttle setting in case of loss of transmitter signal.
Battery Fail Safe – moves the throttle to a preset position when the airborne pack reaches 3.8V.
Stick Mode – choose from Mode 1 through 4.
Range Checking – Power Down reduces transmitter output power for up to one minute, allowing range checking from 50 paces away.
Changeable Throttle Stick – select ratchet for airplanes or smooth for helis.
Adjustable Stick Length – choose the length that suits your flying style.

FrSky DF 2.4GHz Combo Pack for Futaba w/ Module & RX

If you have an older mHz based futaba you still love that is module based, the best upgrade you can give it is this. Just plug the module in, bind and fly.

2.4 GHz frequency hopping - The most reliable link you can get.
Telemetry capable
Advanced Continuous Channel Shifting Technology (ACCST technology shifts channels 80 times per second looking for and using the clearest link) robust frequency agility.
Easy to bind and very fast link-up.
Excellent reboot time, under 1 second.
Excellent brown-out resistance, working perfectly down to less than 3.5v
True Diversity with two antennas.
All channels can be programmed with Failsafe, quickly and easily, even in flight.
Quick and extremely stable in performance.
Precise and smooth servo response.
Extended range (1.5km-2.5km).

Compatible with:
Futaba: 3PM, 3PK, 7U, 8U, 9C, 10C, 9Z, AND FN-Series, T10C, FC-18, FC-28.
Hitec: Optic 6, Eclipse 7, Prism 7

Receiver Specification:
Operating voltage: 3.5~10.0V
Power consumption: 100mA
Resolution: 3072
Latency: 22ms
Number of channels: 8
Range: 1.5km-2.5km +
Dimensions: 56 x 25 x 14 mm
Weight: 12.2g

Module specification:
Operating voltage: 6.0V-13.0V (can handle 3S!)
Power consumption: 50mA
Output Power:: 60mW
Resolution: 3072 (11bit)
Dimensions: 58.5x37.5x22mm
Version: 2.0

1 x 8-channel transmitter module DFT
1 x Transmitter Antenna
1 x 8-channel receiver D8R-II

No comments:

Post a Comment